Balancing synchronous lifting systems


Adapter plates for static lifting columns

Adapter plates for static lifting columns

No matter how precise the manufacturing and assembly processes, it is almost impossible to avoid minor tolerances when installing technical modules. In the case of rigid systems, like lifting columns and electric cylinders, this can cause distortions and lead to malfunctions, such as irregular movement, increased energy costs and an overload of the control, right through to complete device failure. RK has developed a solution for this problem that is not currently available on the market: adapter plates for lifting columns and an axial adjustment for electric cylinders.

Highlights / features:
  • Alignment of the lifting columns via easily accessible setting screws
  • Screws for connection to the lifting column are included in the set
  • Alignment tool (spirit level)
  • Height compensation for lifting columns
  • Catch mechanism to prevent the device being broken off when mounted overhead
  • Height compensation ± 1mm
  • Vertical compensation ± 1° (compensates for unevenness of up to 10 mm)

Adapter plates for static lifting columns enable vertical adjustment in the Z-axis, which helps relieve over-determined systems. The lifting columns can be adjusted and aligned via the horizontal adjustment around the X-Y axis. The adapter plate also offers a simple option for connection to the assembly plate. A small spirit level facilitates precise alignment.



Safety retainer

Safety retainer
Catch mechanism prevents the device being broken off

Tilt limiter

Tilt limiter
Ensures the stability of the system

Alignment tool

Alignment tool
Spirit level facilitates precise alignment

Clamping protection

Clamping protection
Eliminates risk of crushing

Setting screws

Setting screws
For adjustment of adjuster plate
Can also be used as a fixing option

Pressure plate

Pressure plate
For adjustment of adjuster plate


 
axial adjustment for electric cylinders

axial adjustment for electric cylinders

axial adjustment for electric cylinders

With its axial adjustment for electric cylinders, RK offers a unique solution for all structures that do not have an option for the exact parallel installation of at least two cylinders. It also considerably facilitates the precise alignment of the cylinders to one another. The new adapter permits minor construction tolerances and precisely aligns the electric cylinders to one another. Used together with the levelling eye, it also eliminates distortions.

Axial adjustment

Axial adjustment
  •  Compensates manufacturing tolerances
  •  Compensates for installation conditions that are difficult to adjust
  •  Length compensation ± 2mm
  •  Reduces run in time




Do you have any other questions?

Anfrageformular (Land-Auswahl)
We will be happy to advise you on any specific questions you have about our products to help you find the right solution for your application.
captcha