The proportional extension of the individual profiles together, visually as well as technically, must be emphasised. Tremendous stability in every position has been achieved with the best possible overlapping of the profile. As we can expect from the manufacturer in Minden in Westphalia, the complete engineering structure is hidden in the lifting column. No motors or attached parts disturb the unobtrusive optical characteristics of the column with its outer profile in "Wave" design. The Powerlift columns in the versions Start/Stop, Memory and Synchro are available with either interior or exterior drives. By using interior multi drive systems with the Syncro version, up to eight Powerlifts can easily be phased via a bus system. Using external drive up to sixteen Powerlifts(!) can be synchronized if required. Large dimensional conference tables can therefore be used for "stand-up" meetings. Newly developed electronic elements have further improved the control mode and consequently the positioning accuracy. Another result leading on from these newly applied technologies is the extremely quiet sound of the motor.

The limit switch guide rail for the upper and lower stroke limiter can be removed quickly and easily and the traverse path can be changed if needed. The primary fuse is accessible extraneous which enables easy replacement. The Powerlifts are operated using laminated hand key pads proved and tested over the years. They can be stored in a drawer especially developed for this purpose.

In conjunction with the footplate available from the manufacturer, all requirements stated in DIN EN 527-3 and DIN 16550 regarding leg room are guaranteed.