Downloads

Catalogue (PDF)

Adjuster plates for lifting columns

RK have developed a lower and an upper adjuster plate (RK SyncFlex V or H) for the synchronous movement of lifting columns. They ensure the stress-free set-up of over-determined systems (more than 1 fixed bearing). The lower adjuster plate serves to compensate the height and to adjust the lifting column around the vertical actuator – i.e., it adjusts the inclination of the column. A small spirit level mounted in the plate facilitattes precise alignment. The adjuster plate also offers a simple option for connection to the assembly plate. In the case of synchronous systems, the upper plates compensate any differences in height and inclination. If at least two lifting columns are interconnected and mounted, they compensate possible distortions and absorb any differences in synchronisation

Highlights / features:

Alignment of the lifting columns via easily accessible setting screws
Screws for connection to the lifting column are included in the set
Alignment tool (spirit level)
Height compensation for lifting columns
Catch mechanism to prevent the device being broken off when mounted overhead
Height compensation ± 1mm
Vertical compensation ± 1° (compensates for unevenness of up to 10 mm)

Axial adjustment for electric cylinders

With its axial adjustment for electric cylinders, RK offers a unique solution for all structures that do not have an option for the exact parallel installation of at least two cylinders. It also considerably facilitates the precise alignment of the cylinders to one another. The new adapter permits minor construction tolerances of ± 2 mm and precisely aligns the electric cylinders to one another. Used together with the levelling eye, it also eliminates distortions. Furthermore, shock resistance during commissioning and in the event of collisions is greatly increased.

axial adjustment for electric cylinders

Highlights / features:

Compensates manufacturing tolerances
Compensates for installation conditions that are difficult to adjust
Length compensation ± 2mm
Reduces run in time